Catch missing parts at the station

Trenon's camera sees each part being placed and checks it against what this unit needs. If a component, fastener or loose item is missing, an alert names it before the cover is closed or the box is sealed.

Book a 30-minute callSee how it works
Station 08 · Kit contentsLive view
  • 01Bracket B2 placedVerified
  • 02Washer W1 placedVerified
  • 03Manual in boxStop
  • 04Protective cover placedChecking
Manual missing, add before sealing
ChecksPresence, right part, position
WhereAssembly, packing and kitting stations
PilotOne station, live in about three weeks

What it checks

Every part, before it is covered

Once the next layer goes on or the box is taped, a missing part is hard to see. A US OEM told us about a 20-dollar part that turned into an escape of 1.2 to 1.5 million dollars.

Part checks · per unit or box
Checked

Presence. Every required part for this unit or box is placed.

Checked

Right part. The part matches the variant or order being built.

Checked

Position. The part is where it belongs, not just somewhere on the unit.

Checked

Before closing. The check happens before the cover is closed or the box is sealed.

Existing check

Part quality and dimensions. Stays with your incoming and dimensional inspection. Trenon makes sure the right part went in.

How it works

See, verify, alert

01

See

The camera, worn by the operator or mounted at the station, sees the step as it is performed.

02

Verify

Each action is checked against the required process and configuration: presence, position, sequence.

03

Alert

An alert at the station tells the operator exactly what is missing or wrong, while it can still be fixed: a light or screen message to see, a tone or spoken instruction to hear.

Not only this process

One system, any manual station

Trenon is set up per station from your work instruction, so it is not tied to one part, product or industry. You choose which steps matter; Trenon checks presence, position and sequence for each of them.

Wire harness routingRoutes, clips, connectorsConnector seatingConnected, seated, lockedSequence and variantsOrder of steps, mixed-model linesKitting and packingComplete kits and boxes, per orderYour processBring one station to a 30-minute call

FAQ

Questions

Can Trenon check that a box or kit is complete before it is sealed?

Yes. At packing and kitting stations Trenon checks that every item placed by hand is in the box before it is closed, and tells the operator what is missing.

What kinds of missing parts can it catch?

Parts whose placement the operator's camera can observe: fasteners, washers, clips, brackets, seals, small components and loose items in a box or kit.

How does Trenon fit with our part inspection?

It complements it. Your inspection checks the parts; Trenon checks that the right part was placed in the right position at the station.

Does it slow the station down?

No new steps are added. The operator hears an alert only when a checked part is missing.

Pilot

Start with one station

Bring one manual assembly station. In 30 minutes we tell you which checks Trenon can verify there and what a three-week pilot looks like.

Book a 30-minute call

With Nadir Harouak, CEO. Or write to hello@trenon.ai.